Printek 4000se - Manual (Page 69)

P R I N T E R C O N F I G U R A T I O N
61
To set the TCP/IP Gateway, use the CURSOR button to select which digit
group you wish to change, and then use the VALUE buttons to change the
value. The value will change rapidly if the key is held down.
Automatic Carriage Return Auto CR
On
Possible Values: Off, On*
This item enables or disables automatic Carriage Returns (CR) whenever a
Line Feed (LF), Vertical Tab (VT), or Form Feed (FF) is received.
Automatic Line Feed Auto LF
Off
Possible Values: Off*, On
This item enables or disables automatic Line Feeds (LF) when a Carriage
Return (CR) is received.
Perform Host Form Feed at Top-of-Form Host FF at TOF
No
Possible Values: No*, Yes
This item selects whether Form Feeds (FF) will be performed when
received from the host computer if the paper is already positioned at the top
of form (TOF). Setting this item to
No will help prevent blank pages.
Characters Characters
Control
Possible Values: Control*, Printable
This item selects whether certain control character symbols will be printed
or be treated as control characters. The effect of this is dependent upon the
emulation selected above.