Printek 4000se - Manual (Page 62)

P R I N T E R C O N F I G U R A T I O N
54
Interface Menu
The Interface Menu contains several functions for setting up items pertaining
to the hardware interfaces such as the serial and parallel ports as well as the
optional 10/100BaseT Ethernet and Wireless Print Server.
The Setup items for each interface are described in one of the following
sections.
RS-232C Serial Interface on page 55
Parallel/LAN Interfaces on page 59
Entering the Interface Menu
To Enter the Interface Menu, press the SETUP button until INTERFACE
MENU is displayed on the top line as shown below.
INTERFACE MENU
Interface I/o:
Possible Values: Parallel/LAN*, Serial
To
select a different INTERFACE, press either of the VALUE buttons.
Next press either of the FUNCTION buttons to select an interface item. Note
that the selected INTERFACE becomes the one currently in use.
Each interface and the items that pertain to that interface are listed on the
following pages. Note that many items are the same for more than one
interface since the computer attached to that interface may have different
requirements for each of those items.
The factory default values are indicated with an asterisk (*) in this manual
(the asterisk does not appear on the printer’s display).