Patton electronic CopperLink Ethernet Extenders 2168A - Manual (Page 6)

6
Note Packages received without an RMA number will not be
accepted.
1.6 SAFETY WHEN WORKING WITH ELECTRICITY
• This device contains no user serviceable parts. The
equipment shall be returned to Patton Electronics for
repairs, or repaired by qualified service personnel.
• The external power adapter shall be a listed Limited
Power Source. Ensure that the power cable used
meets all applicable standards for the country in
which it is to be installed, and that it is connected to
a wall outlet which has earth ground. The mains
outlet that is utilized to power the devise shall be
within 10 feet (3 meters) of the device, shall be
easily accessible, and protected by a circuit breaker.
• Do not work on the system or connect or disconnect
cables during periods of lightning activity.
In accordance with the requirements of council direc-
tive 2002/96/EC on Waste of Electrical and Electronic
Equipment (WEEE), ensure that at end-of-life you sepa-
rate this product from other waste and scrap and deliver
to the WEEE collection system in your country for recy-
cling.
This device is NOT intended nor approved for connec-
tion to the PSTN. It is intended only for connection to
customer premise equipment.
The Interconnecting cables shall be rated for the proper
application with respect to voltage, current, anticipated
temperature, flammability, and mechanical service-
ability
WARNING
WARNING
WARNING