Panasonic PT-AX200E - Manual (Page 50)

Appendix
Technical Information
50 -
E
NGLISH
The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable
provided with the projector is installed and attached to the security lock slot of the projector when mounting in the
ceiling for safety and security.
J Installing the safety cable
1. Install the ceiling mount bracket according to the Installation Instructions.
2. Loop the security cable around the ceiling mount bracket with less slack.
Lace the cable of the end with a latch through the loop on the other
end of the cable.
3. Pull out the tab of the lock and insert it to the security lock slot of the
projector.
4. Twist the lock 90° and push in securely.
5. Attach the provided screw securely with a screwdriver, such as a
torque screwdriver.
Torque: 0.7±0.1 N·m
Ceiling mount bracket safeguards
NOTE:
• Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling
mount bracket which is not purchased from an authorised distributors, or environmental conditions.
• Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.
• Installation work of the ceiling mount bracket should only be carried by a qualified technician.
• Remove an unused ceiling mount bracket promptly.