Panasonic PT-AX200E - Manual (Page 47)

Technical Information
E
NGLISH - 47
Appendix
J Communication settings
J Control commands
J Inquiry commands
Signal level RS-232C Character length 8 bits
Sync. method Asynchronous Stop bit 1 bit
Baud rate 9 600 bps X parameter None
Parity None S parameter None
Command Control contents Remarks
PON POWER ON
In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp ON control.
POF POWER OFF
If a PON command is received while the cooling fan is operating after the lamp has switched
off, the lamp is not turned back on again straight away in order to protect the lamp.
IIS INPUT
Parameter:
CP1 = COMPONENT IN (YP
B P R )
SVD = S-VIDEO IN
HD1 = HDMI1 IN
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
OMN MAIN Displaying the main menu.
OEN ENTER Activating the selected items in the menu mode.
OBK RETURN Returning to the previous menu or escaping from the menu mode.
OCU/OCD/
OCL/OCR
Navigation buttons
OCU = F button
OCD = G button OCL = I button
OCR = H button
OST DEFAULT Resetting to the factory default setting. (page 23)
OFZ FREEZE
Freezing the projected screen.
Parameter:
0 = OFF
1 = ON
OOT SLEEP
Setting the duration of time to turn off the power automatically. (page 39)
0 = OFF
1 = 60min. 2 = 90min. 3 = 120min. 4 = 150min.
5 = 180min. 6 = 210min. 7 = 240min.
OSH BLANK
Turning off the projection temporarily.
Send the command to switch between ON and OFF.
Do not send the command consecutively.
OVM PICTURE Activating the PICTURE menu. Send the command to switch menu items. (page 23)
VS1 ASPECT Switching the aspect ratio. (page 23)
VPM PICTURE MODE
Switching the PICTURE MODE. (page 30)
Parameter:
NOR = NORMAL DYN = DYNAMIC VCN = VIVID CINEMA
CN1 = CINEMA1 CN2 = CINEMA2 NAT = NATURAL GAM = GAME
Command Control contents Parameter
QPW Power status 000 = OFF 001 = ON
QFZ FREEZE status 0 = OFF 1 = ON
QIN INPUT signal status
CP1 = COMPONENT IN (YP B P R )
SVD = S-VIDEO IN
HD1 = HDMI1 IN
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
QOT SLEEP status
0 = OFF 1 = 60min. 2 = 90min. 3 = 120min. 4 = 150min.
5 = 180min. 6 = 210min. 7 = 240min.
QPM PICTURE MODE status
NOR = NORMAL DYN = DYNAMIC VCN = VIVID CINEMA
CN1 = CINEMA1 CN2 = CINEMA2 NAT = NATURAL GAM = GAME
QSH BLANK status 0 = OFF