Panasonic PT-AX200E - Manual (Page 31)

PICTURE menu
E
NGLISH - 31
Settings
You can adjust the white balance of the projected image.
Setting range: -6 to +6
You can switch automatic adjustment system of the lamp
and the lens iris, which control the contrast and black
level, on/off.
ON: Automatic adjustment
OFF: No adjustment
The luminance sensor detects the brightness of the
room and keeps the luminance in balance automatically.
If needed, you can switch this function on/off from
MODE, or adjust it manually from MANUAL by pressing
I H.
Setting range: -8 to +8
You can perform more detailed image adjustment
manually.
J GAMMA
You can adjust linear intensity at 3 levels. Press I
H to increase/decrease 1 point.
Setting range: -8 to +8
J CONTRAST
You can adjust the amount of contrast in RGB
colours individually. Press I H to increase/
decrease 1 point.
Setting range: -16 to +16
J BRIGHTNESS
You can adjust the brightness in RGB colours
individually. Press I H to increase/decrease
1 point.
Setting range: -16 to +16
J COLOUR MANAGEMENT
You can manage your own defined colour settings.
See “Setting your own colour profile” on page 24.
J NR (Noise Reduction)
You can switch the automatic noise reduction
system on/off. Press I H to select the required
setting.
ON: Automatic noise reduction
OFF: No noise reduction
J MPEG NR
You can switch the automatic noise reduction
system for MPEG format images on/off. The
system minimise block noise and mosquito noise
to eliminate jagged edges, providing an overall
smoother image. Press I H to select the required
setting.
ON: Active
OFF: Deactive
J CINEMA REALITY
You can switch the automatic image synchroniser
on/off for 24 frames a second images, such as
movies. Press I H to select the required setting.
ON: Active
OFF: Deactive
COLOUR TEMPERATURE
DYNAMIC IRIS
LIGHT HARMONIZER
NOTE:
• To assure correct performance of the LIGHT
HARMONIZER, do not interrupt the light on to the
luminance sensor. See “Projector body” on page 12.
ADVANCED MENU
Levels Default setting
GAMMA HIGH 0
GAMMA MID 0
GAMMA LOW 0
RGB Default setting
CONTRAST R 0
CONTRAST G 0
CONTRAST B 0
Less
reddish
Less
bluish
RGB Default setting
BRIGHTNESS R 0
BRIGHTNESS G 0
BRIGHTNESS B 0
NOTE:
• MPEG NR system is not available with COMPUTER/
HDMI (VGA480) signals.
NOTE:
• CINEMA REALITY is effective only with interlace
signals.