Pelco Dx8000 User Manual
Page 72
72
C623M-C (3/05)
Appendix B: Connecting Optional DX8000-MUX8/16 Display Card
The optional DX8000-MUX8/16 display card provides two additional analog video outputs. The display card includes one output that mirrors the
VGA display and one output that is user-definable. The card uses standard BNC-type coaxial connectors.
To attach one or two analog monitors to the display card, connect each monitor to the card using standard coaxial video cable. Refer to Table A
on page 18 for video coaxial cable requirements.
1. Connect an analog monitor to video output one. The output of this port mirrors the VGA output.
2. Connect a second analog monitor to video output two. This port serves as a user-configurable spot monitor output.
3. Refer to the Operation/Programming manual for instructions on configuring the DX8000-MUX8/16 output ports in software.
\
Figure 81. DX8000-MUX8/16 Display Card Connections
ᕡ
ᕢ
IN1
IN2
IN3
IN4
IN5
IN6
IN7
IN8
IN9
IN10
IN11
IN12
IN13
IN14
IN15
IN16
OUT16
OUT15
OUT14
OUT13
OUT12
OUT11
OUT10
OUT9
OUT8
OUT7
OUT6
OUT5
OUT4
OUT3
OUT2
OUT1
ALARM INPUTS
RELAY OUTPUTS
1
2 2 4 5 6 7 8 GND
9 10 11 12 13 14 15 16
1
2 2 4 5 6 7 8 GND
9 10 11 12 13 14 15 16
CRT