Primera Technology Primera Signature III - Manual (Page 19)

Ink Cartridges and Printable CDs 9
4. From within the printer driver setup window, click on the
Cartridge button and then on the Change button to move
the carrier to the load position. Note that the printer driver
must be installed and that the printer must be connected to
your computer (see Section 3) in order to complete this
step.
5. Remove the installed ink cartridge by grasping the top of
the cartridge and firmly pulling it straight toward you. You
will hear the cartridge snap out of position. Remove it
from the printer.
6. Insert the replacement or extra ink cartridge into the
cartridge carrier, copper-end first.
510171Pr5.qxd 5/2/2000 3:39 PM Page 9
TOC INDEX