Primera Technology Primera Signature III - Manual (Page 15)

Ink Cartridges and Printable CDs 5
2. Remove the ink cartridge from its packaging.
3. Remove the tape covering the cartridge’s printhead.
DO NOT TOUCH THE COPPER AREA!
4. Press and release the Ink Cartridge button to move the
carrier to the load position.
5. Insert the ink cartridge into the cartridge carrier, copper
end first.
6. Push the cartridge back until it snaps into place.
7. Press and release the Ink Cartridge button again to reset
the cartridge carrier.
8. Close the printer’s front cover.
NOTE: When changing to subsequent new cartridges, refer to Section E.
NOTE: A Spare Ink Cartridge Holder is included with your printer. This
holder provides a convenient place to store an extra ink cartridge and
also prevents an opened ink cartridge from drying out. To use this
holder, simply insert an Ink Cartridge into the holder, copper-end
first, until it snaps into place.
510171Pr5.qxd 5/2/2000 3:39 PM Page 5
TOC INDEX