Logitech Wireless BH870 - Manual (Page 29)

BH870 Wireless Bluetooth® Headset User’s Guide 29
Figure 19: BH870 Headset paired with both a mobile phone and the USB Bluetooth Adapter
9.4 USB Bluetooth Adapter Visual Indicators
The USB Bluetooth Adapter includes a pair of closely spaced LEDs, which light in various colors and patterns to indicate the status of the
adapter and its connections. These are summarized in the table below.
Adapter Status LED Signal
Microsoft OC softphone mode is selected in the adapter Flashing red
Standard softphone mode is selected in the adapter Double-flashing red
Connected and ready for use, softphone is current target Constant green
Connected and ready for use, mobile phone is current target Constant yellow
Paired but not connected Slow-flashing green
Pairing mode Constant blue
Pairing succeeded Quintuple (5x) blue flash (displays once)
On a call or audio streaming Moderate blue flash
Ringing Triple blue flash
Muted Constant red
Table 6: Visual signals of the USB Bluetooth Adapter and their meanings
9.5 USB Bluetooth Adapter Multifunction Button
The USB Bluetooth Adapter includes a single button, which you can use for many purposes depending on which state the adapter is in
(e.g., waiting, active, or call-on-hold) and the type of gesture you use on the button (i.e., tap or press). Its functions and use are similar to
the multifunction button on the headset.
The button recognizes the following types of gestures:
- Tap: A short, instantly released tap (not longer than 0.8 seconds).
- Press: Press and hold the button for 1 - 3 seconds.