Life Fitness G3 - Manual (Page 20)

19
S
TEP
11:
• Loop the WEIGHT STACK CABLE (29) around one 3-1/2" PULLEY (37).
• Assemble the 3-1/2" PULLEY (37) with the WEIGHT STACK CABLE (29) around it to the RIGHT
and LEFT BOOM PLATES (14 & 15) using one 3/8 x 4-1/4" SILVER BOLT (68), two 3/8" FLAT
WASHERS (64), two GUIDE CABLES (65), two 3/8 x 1" SPACERS (51) and one 3/8" SILVER
LOCK NUT (63). See Figure 11.
• Screw the short threaded end of the WEIGHT STACK CABLE (29) into the end of the GUIDE
BRACKET (42). See Figure 11.
• Disassemble the Short Cables and the Turnbuckles on the ends of the GUIDE CABLES (65) as
shown in Figure 11. Set these pieces aside. The Guide Cables will be reassembled later.
3/8 X 4-1/4"
2
63
68
64
SHORT CABLE
TURN BUCKLE
65
37
51
29
42
F
IGURE
11