Life Fitness G3 - Manual (Page 15)

14
S
TEP
5:
• Place the GUIDE RODS (18) through the BOTTOM SHROUD BRACKET and into the REAR
BASE (4) as shown in Figure 5.
• Lubricate the GUIDE RODS (18) with the included silicon package.
• Slide two WEIGHT STACK SPACERS (33) and two WEIGHT STACK CUSHIONS (28) over the
GUIDE RODS (18). Note: WEIGHT STACK SPACERS are not required with add-on weight stack
option.
• Using extreme care, slide all fifteen WEIGHT PLATES (21) over the GUIDE RODS (18) and down
onto the WEIGHT STACK CUSHIONS (28). Make sure the WEIGHT PLATES (21) all face as
shown.
• Slide the HEAD PLATE ASSEMBLY (23) down the GUIDE RODS (18), onto the weight plate
stack.
• Slide two SHAFT COLLARS (36) over the GUIDE RODS (18) as shown in Figure 5.
36
4
33
28
21
23
18
Bottom Shroud Bracket
F
IGURE
5