Lifescan UltraSmart - Manual (Page 40)

31
If the confirmation window does not fill
completely before the meter begins to
count down, do not add more blood to the
test strip; discard the test strip and retest.
If you have trouble filling the test strip,
contact your local LifeScan Customer
Service office. See back cover for contact
information.
If the confirmation window is not full, you
may get an error message or an inaccurate
test result.
Good
Sample
Sample
Too Small
Note: If you do not apply a blood sample within
three minutes, the meter will turn off automatically.
Remove the test strip and then insert it back into
the meter to turn the meter back on.
Hold the blood drop to the top edge of the
test strip until the confirmation window is
full before the meter begins to count
down.
DCO_06158108A_OUS_OB_GB 5/6/03 1:25 PM Page 31