Lifescan UltraSmart User Manual

Page 37

Text mode
Original mode

Insert a test strip, contact bars end
first and facing up, into the test port.
Push it all the way in until it will go no
further. The meter will turn on
automatically. “OneTouch UltraSmart”
will appear briefly on the display. Then
the code number will appear. Be sure
the meter and test strip codes match.
If they do not, code the meter
correctly.

Insert This End

Step-by-Step Test Procedure

Insert Test Strip.

STEP 1

DCO_06158108A_OUS_OB_GB 5/6/03 1:24 PM Page 28