Using the 3/8" wrench, remove the four
screws from the top front of the roof assem-
bly and the two screws from the sides of the
control box. Carefully lower the front con-
trol panel. See Figure F.2.

sWith the 9/16" wrench, remove the
exhaust pipe rain cap.

Remove the fuel tank cap, gasket, and the
lift bail cover seal.

8. With the help of an assistant, carefully

remove the roof. The door assembly
remains attached to the roof. Replace the
fuel cap.

9. With 3/8" wrench, remove the left rear panel

and the right and left front panels. See
Figure F.1.