Lowrance electronic 540c Baja User Manual

Page 91

To turn on the GPS Simulator:
1. Press

MENU

, highlight

YSTEM

ETUP

and press

ENT

2. Select

IMULATORS

and press

ENT

The GPS Simulator menu.

The GPS Simulator page will appear. The page has dialog boxes that

allow you to change the Track, Speed, Altitude, Latitude and Longitude

of your simulation.
You can begin your simulation at a waypoint by using the Select Start-

ing Waypoint command or direct the simulation manually by using the

Steer with Arrows command, which will place Steer with Arrow boxes

on the main display.

Tip:

The Initialize GPS command offers another way to choose a desired

location to begin a simulation. The Initializing GPS command al-

lows you to move the center display arrow to any location on the

map. We will explore the Initialize GPS command in more detail in
the Initialize GPS entry below.

3. When all settings have been set to your preferences, turn on the

simulator on by highlighting the

GPS

IMULATOR

box and pressing

ENT

. Press

EXIT

repeatedly to return to the map display. Repeat Steps

1-3 to turn off the simulator.
NOTE:

A message and tone appear periodically, warning you that the

simulator is on. To turn the simulator off, repeat the above steps or

turn the unit off.