Lowrance electronic 540c Baja - Manual (Page 103)

95
play. NauticPath charts are ready for display as soon as they are
inserted into the unit. Navionics charts must be inserted into the
unit, then selected as a Map Choice option in the Map Data menu.
To display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
2. From the Map Page, press
MENU
| ↓ to
M
AP
D
ATA
|
ENT
| ↓ to
M
AP
C
HOICE
|
ENT
. Select the Map Name, then press
ENT
|
EXIT
|
EXIT
.
Navionics Map Choice highlighted. Press Ent to select the desired
Navionics map from the Map Choice drop down box.
WARNING:
You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.
Overlay Data
On any Page display except Satellite Status, you can overlay additional
GPS or navigation data on the screen with the Overlay Data command.
For example, if you left your watch at home, you could display the local
time on top of the map. Or, if you wanted to see details about your
route and trip, you could show your bearing, course, average speed and
trip distance.
The various data available from your unit are divided into categories in
the Overlay Data menu. These categories include GPS Data, Naviga-
tion, Trip Calculator, Time and Miscellaneous Data.
You can select items from any of these categories for display, in any
combination — the category divisions are there only to help you sort
through the information.