Lowrance electronic 540c Baja - Manual (Page 77)

69
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 1; the arrival alarm has been triggered and
the bearing arrow on the compass rose has turned to point toward Wpt
2, off to the east. In Fig. 3 the traveler has turned east on his new
course and is heading straight for Wpt 2, which is 2.37 miles away. Fig.
4 shows route navigation on the Map Page. In this figure, the traveler
has reached Wpt 2 and is half-way along the leg between Wpts 2 and 3.
Trails
Delete a Trail
This is the command used to delete a trail:
Press
MENU
|
MENU
| ↓ to
M
Y
T
RAILS
|
ENT
| ↓ to trail name|
ENT
| → to
D
E-
LETE
T
RAIL
|
ENT
| ← to
Y
ES
|
ENT
.
Tip:
You can also delete all trails at once:
1. Press
MENU
|
MENU
| ↓ to
M
Y
T
RAILS
|
ENT
.
2. Press → to
D
ELETE
A
LL
|
ENT
| ← to
Y
ES
|
ENT
.
Figure 2. Figure 1.
Figure 4. Figure 3.