LSI 7202CP - Manual (Page 50)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
A-6 Glossary of Terms and Abbreviations
Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.
Responder A FC term referring to the answering device.
RISC Core LSIFC909 chips contain a RISC (Reduced Instruction Set Computer)
processor, programmed through microcode scripts.
ROM Read Only Memory. Memory from which information can be read but not
changed. The contents of ROM are not erased when the computer is
turned off.
SAN Storage Area Network.
SCAM SCSI Configured AutoMatically. A method to automatically allocate SCSI
IDs using software when SCAM compliant SCSI devices are attached.
Scatter/Gather A device driver feature that lets the host adapter modify a transfer data
pointer so that a single host adapter transfer can access many segments
of memory. This minimizes interrupts and transfer overhead.
SCB SCSI Command Block.
SCSI Small Computer System Interface. A specification for a high-performance
peripheral bus and command set. The original standard is referred to as
SCSI-1.
SCSI-2 The current SCSI specification which adds features to the original
SCSI-1 standard.
SCSI ID A way to uniquely identify each SCSI device on the SCSI bus. Each
SCSI bus has eight available SCSI IDs numbered 0 through 7 (or 0
through 15 for Wide SCSI). The host adapter usually gets ID 7 giving it
priority to control the bus.
Sequence A term referring to one of the FC “building blocks”, composed of one or
more related frames for a single operation.
SGL Scatter Gather List.
SNAP SubNetwork Access Protocol.
Synchronous
Data Transfer One of the ways data is transferred over the SCSI bus. Transfers are
clocked with fixed frequency pulses. This is faster than asynchronous
data transfer. Synchronous data transfers are negotiated between the
SCSI host adapter and each SCSI device.