LSI 7202CP User Manual

Page 26

3-8

BIOS Features

Does the LED on the adapter indicate LINK? (note that LINK is only
valid after the device is probed)

Does the LED on the switch or remote enclosure indicate LINK?

Does the LINK-SPEED parameter selected by the adapter match
that of the bus (

, or

Auto

If you do not see disks, the following additional debug information may
help to identify the problem.

3.1.5.3 Verifying Correct Installation

Use this procedure to verify installation of your Fusion-MPT adapter in
the system:

Step 1.

Power on the system.

Step 2.

When the banner displays, press the

Stop-A

keys to interrupt

the boot process and stop at the

prompt.

Step 3.

Use the

show-devs

command to list the system devices. You

should see an output similar to the following:

ok show-devs

/SUNW,UltraSPARC-III@0,0
/virtual-memory
/memory@m0,0
/aliases
/options
/openprom
/chosen
/packages
/upa@8,480000/SUNW,ffb@0,0
...
/pci@8,700000/IntraServer,fc@2
/pci@8,700000/IntraServer,fc@1,1
/pci@8,700000/IntraServer,fc@1
...
/pci@8,700000/IntraServer,fc@2/disk
/pci@8,700000/IntraServer,fc@2/tape
/pci@8,700000/IntraServer,fc@1,1/disk
/pci@8,700000/IntraServer,fc@1,1/tape
/pci@8,700000/IntraServer,fc@1/disk
/pci@8,700000/IntraServer,fc@1/tape
/pci@8,700000/scsi@6,1/tape
/pci@8,700000/scsi@6,1/disk