LSI 7202CP User Manual
Page 22
3-4
BIOS Features
Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.
display this menu, select a device under Adapter field on the Main menu
and press
Enter
.
3.1.3.3 Persistent IDs Menu
The Persistent ID screen is used to review the automatic mapping
between a drive WorldWide Name and its assigned logical SCSI bus and
target ID. You can also use this screen to force a drive to a specific
logical Target ID.
Selecting
Add WWN
at an unused location clears out the associated
WWN/DID field and allows you to enter the first 16 characters of the
WWN. Pressing
<Enter>
afterwards allows the last 16 characters to be
entered. The CU automatically adds any leading zeros if necessary. If
you make an entry by mistake, select
Erase
on the appropriate line to
remove the entry.
Logical ID selection defaults to be the lowest ID available. This can be
changed by using the
<+>
or
<->
keys to cycle the numbers. The Bus
field always defaults to 0 and cannot be changed. It is displayed in the
case where an outside utility reserved a different number.
Next Page and Previous Page options are provided on the persistent ID
screens, through the F2 key, which moves the screen forward or back by
16 entries. However, the CU requires that any modifications to the
current page be stored before new entries may be viewed or modified. A
confirmation window pops up asking to store or discard changes if
needed.
3.1.3.4 Device Properties Menu
The Device Properties menu allows you to view and update individual
device settings for an adapter.
Note:
The number of fields on the menu requires that you scroll
left/right to view all of the information. When accessing this
menu, use the Home/End keys to scroll to columns cur-
rently not displayed. The scroll indicator on the bottom of
the menu shows where the cursor is relative to the first and
last columns.