Lenovo RD430 - Manual (Page 98)

1. Remove the three screws 1 that secure the front bezel and then pivot the front bezel outward to
remove it from the chassis.
Figure 44. Removing the front bezel
2. To reinstall the front bezel, align the tabs on the bottom edge of the front bezel with the corresponding
holes in the chassis. Then, pivot the front bezel inward until it snaps into position and the three screw
holes
1 in the top edge of the front bezel are aligned with the corresponding holes in the top of the
chassis. Install the three screws to secure the front bezel in place.
ID MEM 1
PSU 1 2
1 2 3 4 5 6 7 8 MEM 2 1 2 3 4 5 6 7 8 9
10 CPU 1 2
1 2 3 4 5 6 7 8 9
10
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Figure 45. Installing the front bezel
Installing, removing, or replacing hardware
This topic provides instructions on how to install, remove, or replace hardware for your server. You can
expand the capabilities of your server by adding new hardware devices, such as memory modules, PCI
Express cards, or other server options, and maintain your server by replacing the failing hardware devices.
If you are handling a server option, refer to the appropriate installation and or removal instructions in this
topic along with the instructions that come with the option.
86 ThinkServer RD430 User Guide