Lenovo RD430 - Manual (Page 43)

11 ID LED
When you press the ID button on the front of the server, the ID LEDs on both the front and rear of the server
are lit to help you locate the server among other servers. You also can turn on the ID LEDs using a remote
management program for server presence detection.
ID LED Color Description
On Blue The server is identified.
Off None The ID LED is not in use or the server is not identified.
Server components
This topic provides information to help you locate the components of your server. For more information
about major components, see the related topics in “Locations” on page 13.
To remove the server cover and gain access to the inside of the server, see “Removing the server cover”
on page 83.
The chassis configuration varies by model. The following illustrations show the three main chassis
configurations based on the supported hard disk drives.
• “Components of server models with eight 3.5-inch hard disk drive bays” on page 32
• “Components of server models with 12 3.5-inch hard disk drive bays” on page 33
• “Components of server models with 2.5-inch hard disk drive bays” on page 34
Note: Depending on the model, your server might look slightly different from the illustrations in this topic.
Chapter 3 . Product overview 31