Lexmark C 760 - Manual (Page 4)

Edition: June 2004
The following paragraph does not apply to any country where such provisions
are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES
THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some states do not allow disclaimer of express or implied warranties in
certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes
are periodically made to the information herein; these changes will be incorporated in
later editions. Improvements or changes in the products or the programs described
may be made at any time.
Comments about this publication may be addressed to Lexmark International, Inc.,
Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550,
U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing
and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ.
Lexmark may use or distribute any of the information you supply in any way it believes
appropriate without incurring any obligation to you. You can purchase additional
copies of publications related to this product by calling 1-800-553-9727. In the United
Kingdom and Eire, call +44 (0)8704 440 044. In other countries, contact your point of
purchase.
References in this publication to products, programs, or services do not imply the
manufacturer intends to make these available in all countries in which it operates. Any
reference to a product, program, or service is not intended to state or imply that only
that product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any existing intellectual property right may
be used instead. Evaluation and verification of operation in conjunction with other
products, programs, or services, except those expressly designated by the
manufacturer, are the user’s responsibility.
Lexmark, Lexmark with diamond design, and MarkNet are trademarks of Lexmark
International, Inc., registered in the United States and/or other countries.
ImageQuick is a trademark of Lexmark International, Inc.
PostScript® is a registered trademark of Adobe Systems Incorporated. PostScript 3 is
Adobe Systems’ designation of a set of printer commands (language) and functions
included in its software products. This printer is intended to be compatible with the
PostScript 3 language. This means the printer recognizes PostScript 3 commands
used in various application programs, and the printer emulates the functions
corresponding to the commands.
Other trademarks are the property of their respective owners.
© 2004 Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RIGHTS
This software and any accompanying documentation provided under this agreement
are commercial computer software and documentation developed exclusively at
private expense.
Federal Communications Commission (FCC) compliance
information statement
This printer complies with the limits for a Class B digital device (without a network
cable or high-capacity output finisher installed) and for a Class A digital device (with a
network cable or high-capacity output finisher installed), pursuant to Part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Any questions on this statement should be directed to:
Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
(859) 232-3000
Refer to the online documentation for additional compliance information.
Safety information
• If your product is not marked with this symbol , it must be connected to
an electrical outlet that is properly grounded.
CAUTION: Do not set up this product or make any electrical or cabling
connections, such as the power cord or telephone, during a lightning storm.
• The power cord must be connected to an electrical outlet that is near the
product and easily accessible.
• Refer service or repairs, other than those described in the operating
instructions, to a professional service person.
• This product is designed, tested, and approved to meet strict global safety
standards with the use of specific Lexmark components. The safety features
of some parts may not always be obvious. Lexmark is not responsible for the
use of other replacement parts.
• Your product uses a laser.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
• Your product uses a printing process that heats the print media, and the heat
may cause the media to release emissions. You must understand the section
in your operating instructions that discusses the guidelines for selecting print
media to avoid the possibility of harmful emissions.
Conventions
Note: A note identifies something that could help you.
CAUTION: A caution identifies something that could cause you harm.
Warning: A warning identifies something that could damage your product hardware
or software.
Static sensitivity notice
Warning: This symbol identifies static-sensitive parts. Do not touch
in the areas near these symbols without first touching the metal
frame of the printer.