Linksys SRW224G4P - Manual (Page 50)

Chapter Configuring the Switch
4 24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
SNMP > Views
SNMP > Views
Vew Name The name of the SNMP view . Click the Vew
Name option and then select a view from the drop-down
menu .
New Vew Name Create a new SNMP view by clicking the
New Vew Name option and entering a view name into
the field .
Subtree ID Tree Shows the currently configured object
identifiers of branches within the MIB tree that define the
SNMP view . Click the Select from Lst option and select a
subtree from the list . To insert a subtree, click the Insert
option and specify an subtree ID .
Vew Type Indicates if the object identifier of a branch
within the MIB tree is included or excluded from the SNMP
view . Select the type from the drop-down menu .
Define a view name and specify subtree ID in the switch
MIB to be included or excluded in the view . Click Add to
save the new view .
SNMP > Group Profile
SNMP > Group Profile
Group Name The name of the SNMP group to which the
user is assigned . (Range: 1-32 characters) .
Securty Model The user security model; SNMP v1, v2c
or v3 .
Securty Level The security level used for the user:
noAuthNoPrv There is no authentication or encryption
used in SNMP communications . (This is the default for
SNMPv3 .)
AuthNoPrv SNMP communications use authentication,
but the data is not encrypted (only available for the SNMPv3
security model) .
AuthPrv SNMP communications use both authentication
and encryption (only available for the SNMPv3 security
model) .
Operaton
Read The configured view for read access . (Range: 1-
64 characters)
Wrte The configured view for write access . (Range: 1-
64 characters)
Notfy The configured view for notifications . (Range:
1-64 characters)
•
•
•
•
•
•