Linksys SRW224G4P - Manual (Page 16)

12
Configuration Using the Console Interface
24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
Chapter 4
Back to Main Menu
Select Back to Man Menu if you want to return to the
main menu .
Port Status
The Port Status screen allows you to view the status of
a port . The Port, Enable, Link Status, Spd/Dpx, and Flow
Control are displayed .
Port Status
Ports 1 through 24 are Ethernet RJ-45 ports and are
all 10/100 ports . Ports G3 and G4 are shared with the
miniGBIC ports . If there is a connection to one of the
miniGBIC ports then the corresponding Gigabit RJ-45 port
cannot be used .
Port Configuration
You can use the Port Configuration screen to enable/
disable an interface, set auto-negotiation and the interface
capabilities to advertise, or manually fix the speed, duplex
mode, and flow control .
Port Configuration
Enable Allows you to manually enable or disable an
interface . You can disable an interface due to abnormal
behavior (for example, excessive collisions), and then
enable it again, once the problem has been resolved . You
may also disable an interface for security reasons .
Auto-negotaton (Port Capabltes) This option enables or
disables auto-negotiation . When auto-negotiation is enabled,
you need to specify the capabilities to be advertised . When
auto-negotiation is disabled, you can force the settings for
speed, mode, and flow control . The following capabilities are
supported .
10half Supports 10 Mbps half-duplex operation
10full Supports 10 Mbps full-duplex operation
100half Supports 100 Mbps half-duplex operation
100full Supports 100 Mbps full-duplex operation
1000full Supports 1000 Mbps full-duplex operation
Default: Auto-negotiation enabled; Advertised capabilities
for 100Base-TX – 10half, 10full, 100half, 100full; 1000Base-
T – 10half, 10full, 100half, 100full, 1000full; 1000Base-SX/
LX/LH (SFP) – 1000full; 100Base-FX (SFP) – 100full
Speed/Duplex Allows manual selection of port speed and
duplex mode (that is, with auto-negotiation disabled) .
Flow Control Allows automatic or manual selection of
flow control .
PoE Configuration
The PoE Main Menu screen displays three menu choices
and a back option:
PoE Main Menu
System PoE Configuration
Port PoE Status
Port PoE Configuration
•
•
•
•
•
1 .
2 .
3 .