Printing from paper tray 1 – Lexmark Z65 User Manual

Page 8

Text mode
Original mode

Printing from paper tray 1

From paper tray 1, you can print on any supported paper type, such as plain,
coated, photo, or glossy paper, transparencies, envelopes, labels, iron-on
transfers, or banner paper. Your paper must be within these dimensions:

If you load transparencies or plain, coated, photo, or glossy paper into paper
tray 1, your printer detects the paper type and automatically adjusts the Paper
Type setting in the printer software for you.

To print a document from this tray:

Load the paper, with the print side facing you, against the right side of
the paper tray.

Squeeze and slide the paper guide to the left edge of the paper.

Notes:

–

To avoid a paper jam, load only one size of paper at a
time into the paper tray.

Width:

76.2 to 215.9 mm (3.0 to 8.5 in.)

Length:

127 to 432 mm (5.0 to 17.0 in.) for Windows

127 to 355.6 mm (5.0 to 14.0 in.) for Macintosh

Note: Banner paper may be longer.