Linksys SPA 900 - Manual (Page 57)

3-14
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 3 Managing Linksys IP Phones
Configuring the Web Service
For instructions about how to configure phone extensions using the SPA Installation Wizard or the
administration web server, refer to the SPA9000 Administration Guide.
Step 13 Repeat Step 9 for each extension or user that you are monitoring using the SPA932.
Step 14 Click Submit All Changes at the bottom of the page.
Monitoring the SPA932
To display the status of the SPA932, click the SPA932 Status link on the SPA932 tab. The sys-
tem displays the screen shown in Figure 3-7 .
Figure 3-7 SPA932 Status
For information about each field on this display, refer to Chapter 5, “Linksys IP Phone Field Reference” .
Configuring the Web Service
Note Only web-enabled phones allow these features.
Web Interface Basic and Advanced Views
You can access configuration parameters using either the Basic or Advanced view. The SPA
Provisioning tab is only visible from the Advanced Administrator view of the web interface.
Warning Switching between the Basic and Advanced views discards the uncommitted changes that have been
made on the web pages.
Configuration Parameters
You can configure SPA phone parameters in two ways: