Linksys SPA 900 - Manual (Page 131)

5-26
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Regional Tab
Note None of the following parameters apply to the SPA901.
Field Description
Prefer G711u Code Makes this codec the preferred codec for the associated call.
Defaults to *017110.
Force G711u Code Makes this codec the only codec that can be used for the associated call.
Defaults to *027110.
Prefer G711a Code Makes this codec the preferred codec for the associated call.
Defaults to *017111
Force G711a Code Makes this codec the only codec that can be used for the associated call.
Defaults to *027111.
Prefer G723 Code Makes this codec the preferred codec for the associated call.
Defaults to *01723.
Force G723 Code Makes this codec the only codec that can be used for the associated call.
Defaults to *02723.
Prefer G726r16 Code Makes this codec the preferred codec for the associated call.
Defaults to *0172616.
Force G726r16 Code Makes this codec the only codec that can be used for the associated call.
Defaults to *0272616.
Prefer G726r24 Code Makes this codec the preferred codec for the associated call.
Defaults to *0172624.
Force G726r24 Code Makes this codec the only codec that can be used for the associated call.
Defaults to *0272624.
Prefer G726r32 Code Makes this codec the preferred codec for the associated call.
Defaults to *0172632.
Force G726r32 Code Makes this codec the only codec that can be used for the associated call.
Defaults to *0272632.
Prefer G726r40 Code Makes this codec the preferred codec for the associated call.
Defaults to *0172640.
Force G726r40 Code Makes this codec the only codec that can be used for the associated call.
Defaults to *0272640.
Prefer G729a Code Makes this codec the preferred codec for the associated call.
Defaults to *01729.