Web interface urls, Upgrade url, Resync url – Linksys SPA 900 User Manual
Page 37
2-14
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 2 Getting Started
Web Interface URLs
Web Interface URLs
The Linksys IP phone web interface supports several functions through special URLs:
•
Upgrade
•
Reboot
•
Resync
Administrator account privilege is needed for these functions.
Upgrade URL
The Upgrade URL lets you upgrade the Linksys IP phone to the firmware specified by the URL, which
can identify either a TFTP or HTTP server.
Note
If the value of the
Linksys IP phone even if the web page indicates otherwise.
The syntax of the Upgrade URL is as follows:
•
spa-ip-addr/admin/upgrade?[protocol://][server-name[:port]][/firmware-pathname]
Both HTTP and TFTP are supported for the upgrade operation.
If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that requests the
URL is used as server-name.
If no port specified, the default port of the protocol is used. (69 for TFTP or 80 for HTTP)
The firmware-pathname is typically the file name of the binary located in a directory on the TFTP or
HTTP server. If no firmware-pathname
Resync URL
The Resync URL lets you force the Linksys IP phone to do a resync to a profile specified in the URL,
which can identify either a TFTP, HTTP, or HTTPS server.
Note
The SPA resyncs only when it is idle.
The syntax of the Resync URL is as follows:
If no parameter follows /resync?, the Profile Rule setting from the Provisioning page is used.
If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that requests the
URL is used as server-name.
If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, and 443 for HTTPS).
The profile-path is the path to the new profile with which to resync, for example:
http://192.168.2.217admin/resync?tftp://192.168.2.251/spaconf.cfg