Linksys SPA 900 - Manual (Page 111)

5-6
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
System Tab
System Tab
This section describes the fields for the following headings on the System tab:
• System Configuration, page 5-6
• Internet Connection Type, page 5-6
• Optional Network Configuration, page 5-7
• VLAN Settings, page 5-8
System Configuration
Internet Connection Type
Field Description
Restricted Access Domains
(not applicable to SPA901) This feature is used when implementing software customization.
Enable Web Server
(not applicable to SPA901) Enable/disable web server of Linksys IP phone
This feature should only be used on firmware version 1.0.9 or later.
Defaults to yes.
Web Server Port
(not applicable to SPA901) Port number of the Linksys IP phone administration web server.
Defaults to 80.
Enable Web Admin Access
(not applicable to SPA901) Lets you enable or disable local access to the administration web server. Select yes or no
from the drop-down menu.
Defaults to yes.
Admin Passwd
(not applicable to SPA901) Password for the administrator.
Defaults to no password.
User Password Password for the user.
Defaults to no password.
Field Description
DHCP Enable or disable DHCP.
Defaults to DHCP (yes on the SPA901).
Static IP
(SPA901 only) IP address. Blank of DHCP assigned address is used.
Netmask
(SPA901 only) Network mask. Blank if DHCP assigned.