Lanier 5470 - Manual (Page 72)

Interrupt Copying
4 - 26 Copying Methods
Interrupt Copying
1
Press the Interrupt key.
2
When the copier stops:
•
Remove the remaining originals from the
Document Feeder.
•
Position the new original on the Exposure
Glass.
3
Make the copy requirement selections. See “Making Your Copy” on page 1-3.
4
Press the Start key.
5
When all Interrupt Copies are finished, press the
Interrupt key again to cancel the Interrupt mode.
Note: The previous copy quantity, copy
ratio, copy darkness, and paper size are
automatically reset.
6
Put the remaining originals that you removed in
Step 2, back into the Document Feeder.
7
Press the Start key to continue the original copy job.
You can interrupt a copy job that is in progress to make a quick copy of another original,
without disrupting the original copy job settings or copy count. Do this by using the Interrupt
feature.