Top-of-form (tof), Setting tof for continuous forms – Lexmark 4227 User Manual
Page 82

Chapter 4: Selecting and Loading Paper
76
S
e
lecting and Loading Paper
Top-Of-Form (TOF)
Top-Of-Form (TOF) sets the first line of print. You can set and save
TOF from the operator panel for single sheets, continuous forms,
and for each macro that is enabled.
Setting TOF for Continuous Forms
TOF can range from minus 2.54 cm (1 in.) to plus 35.56 cm (14 in.)
from the top of continuous form paper.
Note:
Use this method to set TOF for continuous forms loaded in
the optional Tractor 2 Feeder.
To set and save TOF:
1
Turn the printer On.
2
Make sure the paper path is clear.
3
Move the paper select lever down to the continuous forms
position.
4
Load continuous form paper on the feed pins (or Tractor 2
feeder pins if you are using the Tractor 2 Feeder option).
5
Press Start.
The paper moves to the current TOF.
- E260d (142 pages)
- 6600 Series (173 pages)
- 10N0227 (1 page)
- Z12 (2 pages)
- 301 (144 pages)
- NO. 35 (1 page)
- Z65n (111 pages)
- dn2 (217 pages)
- 10E (144 pages)
- Z2300 (54 pages)
- 230 (213 pages)
- 310 Series (2 pages)
- PRO700 (24 pages)
- C 720 (18 pages)
- C520 (145 pages)
- X656 MFP (104 pages)
- Prospect Pro207 (27 pages)
- 337 (258 pages)
- OptraImage 242 (207 pages)
- T64x (6 pages)
- C524 (146 pages)
- 4098-001 (70 pages)
- 1200 Series (21 pages)
- X650 Series (8 pages)
- 5300 (179 pages)
- 302 (274 pages)
- 4549 (235 pages)
- 202 (320 pages)
- 4076-0XX (89 pages)
- 10N0016 (1 page)
- 5025 (171 pages)
- 1361760 (1 page)
- C 546dtn (6 pages)
- Interpret S400 (40 pages)
- x6575 (2 pages)
- 27S2156-001 (2 pages)
- MENUS AND MESSAGES C522 (55 pages)
- Z35 (101 pages)
- Z25 (24 pages)
- series x5100 (77 pages)
- Z82 (105 pages)
- 2500 Series (76 pages)
- 1200 (208 pages)
- Z33 (114 pages)
- 7600 Series (181 pages)