Installing the tractor 2 feeder – Lexmark 4227 User Manual
Page 103

97
Chapter 5: Printer Options
P
rinter Options
Installing the Tractor 2 Feeder
The Tractor 2 Feeder is easy to install. No special tools or training
are needed.
Note: Before installing the Tractor 2 Feeder, make sure contin-
uous forms are loaded on the other tractor feeder.
(When
Tractor 2 is installed, you must remove it from the printer to
load continuous forms on the other tractor feeder.) For help
loading continuous forms on the other tractor feeder, see
“To load continuous forms:” on page 70.
1
Make sure the printer is Off.
2
Open, pull up, and remove the front cover.
3
If necessary, push the paper select lever down to the continu-
ous forms
position.
4
Remove all tape from the Tractor 2 Feeder including the tape
that holds the Tractor 2 Feeder cable to the Tractor 2 Feeder.
5
Grasp the Tractor 2 Feeder using the right and left side panels.
- E260d (142 pages)
- 6600 Series (173 pages)
- 10N0227 (1 page)
- Z12 (2 pages)
- 301 (144 pages)
- NO. 35 (1 page)
- Z65n (111 pages)
- dn2 (217 pages)
- 10E (144 pages)
- Z2300 (54 pages)
- 230 (213 pages)
- 310 Series (2 pages)
- PRO700 (24 pages)
- C 720 (18 pages)
- C520 (145 pages)
- X656 MFP (104 pages)
- Prospect Pro207 (27 pages)
- 337 (258 pages)
- OptraImage 242 (207 pages)
- T64x (6 pages)
- C524 (146 pages)
- 4098-001 (70 pages)
- 1200 Series (21 pages)
- X650 Series (8 pages)
- 5300 (179 pages)
- 302 (274 pages)
- 4549 (235 pages)
- 202 (320 pages)
- 4076-0XX (89 pages)
- 10N0016 (1 page)
- 5025 (171 pages)
- 1361760 (1 page)
- C 546dtn (6 pages)
- Interpret S400 (40 pages)
- x6575 (2 pages)
- 27S2156-001 (2 pages)
- MENUS AND MESSAGES C522 (55 pages)
- Z35 (101 pages)
- Z25 (24 pages)
- series x5100 (77 pages)
- Z82 (105 pages)
- 2500 Series (76 pages)
- 1200 (208 pages)
- Z33 (114 pages)
- 7600 Series (181 pages)