Lowrance electronic AirMap 1000 - Manual (Page 58)

52
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from AirMap's memory onto an MMC.
The unit will display first a progress then a completion message when the
data transfer is finished. To return to the Page view, press
EXIT | EXIT .
4. Loading: There may be more than one GPS Data File (*.USR) on the
card. To select a file, press
ENT to activate the selection box, use
↓ or ↑
to highlight the file, then press ENT to accept the selection. Next, press
↓ to
L OAD
| ENT . The unit will display a completion message when the
data transfer is finished. To return to the Page view, press EXIT | EXIT .
From left to right, these figures show the menu sequence for loading a
GPS Data File from an MMC into AirMap's memory.
Switch to Land Mode
To leave Aviation Mode and switch to Land Mode:
1. Press MENU | MENU |
↓ to
S
YSTEM
S
ETUP
| ENT |
↓ to
D
ISABLE
A
IR
M
AP
| ENT .
2. Unit asks, "Are you sure you want to turn on land navigation mode?"
3. Press
←|
ENT and the unit switches to Land Mode.
Switch Back to Aviation Mode from Land Mode
To leave Land Mode and switch back to Aviation Mode:
1. Press
MENU | MENU |
↓ to
S YSTEM S ETUP
| ENT |
↓ to
E NABLE A IR M AP
| ENT .
2. Unit asks, "Are you sure you want to turn on aviation mode?"
3. Press
←|
ENT and the unit switches to Aviation Mode.