Krell Industries S-1000 - Manual (Page 49)

Krell S–1000 45
System Configuration, continued
Step 3, Configure Level Adjustment
PLII Control Screen
After setting your selections, press the previous key (30) once to
return to the
CONFIGURE LEVELS screen.
Use the
PLII CONTROL
menu to adjust the signal for Dolby Pro Logic II
music mode, which derives a 5.0 signal from two-channel material.
DIMENSION
You can adjust the sound field toward the front or rear loudspeakers,
to achieve a more suitable balance from all loudspeakers with cer-
tain recordings. The adjustment range is 0 (maximum surround) to 6
(center). The default setting is 3 (neutral).
CENTER WIDTH
You can adjust how much of the center output signal is spread to
the left and right channel outputs. The adjustment range is from 0
(maximum center channel signal) to 7 (lowest signal; effectively
mutes the center channel).
Select PLII CONTROL from the CONFIGURE LEVELS menu. The PLII CONTROL
screen appears:
PLII Control
Prev