Krell Industries S-1000 - Manual (Page 32)

28 Krell S–1000
The third option on the speaker main menu screen,
CALIBRATE VOLUME,
allows you to calibrate each channel using the internal noise genera-
tor of the S–1000.
A sound pressure level (SPL) meter is required for this procedure.
Select CALIBRATE VOLUME on the MAIN MENU. The CALIBRATE ROOM SETUP
screen appears:
Press the enter key to choose AUTO NOISE SEQUENCE. The AUTO
CALIBRATION screen appears:
System Configuration, continued
Step 1, Listening Room Setup
Calibrate Room Setup Screen
Auto Noise Sequence
Auto Calibration Screen
Note
Calibrate Volume
HOW TO NAVIGATE
IN THE MENU MODE
1 Press the menu key (29) to enter and
exit the menu mode from the
operational mode.
2 Press the direction keys (33) to scroll
from line to line, and to scroll through
options within a line.
3 Press the enter key (32) to select and
set an option.
4 Use the directional keys to scroll to
the next line.
5 Press the prev key (30) to return to the
previous screen.
6 Press the pre key (1) to exit the menu
mode and place the S–1000 in the
stand-by mode.