Krell Industries S-1000 - Manual (Page 36)

32 Krell S–1000
System Configuration, continued
Step 2, Configure Devices
PREVIOUS
or
DISABLED
For devices that do not use a video input, for example, a CD player,
there are two options:
PREVIOUS or DISABLED . PREVIOUS allows the last
active video input to continue to be displayed, as long as a previous
selection has been made.
DISABLED
turns off the video outputs.
NTSC or PAL
Choose a standard video format.
OFF, MENU ONLY,
or
MENU AND STATUS
Select one of these options for component video inputs, based on
your video source and monitor capabilities.
When using a progressive or high definition (HD) video source, select
OFF or MENU ONLY in order to pass the video signal properly. The
S–1000 can only display on-screen text in NTSC or PAL. If the moni-
tor cannot automatically switch between progressive or HD video
and standard definition (NTSC or PAL) video, you must select
OFF .
Then, in addition, connect the composite or S-video OSD output to
the monitor, in order to disploay the setup menu.
HDMI TM
Select this option for multi-channel output.
Use the enter (32) and directional (33) keys to navigate the menu
and set selections.
When all selections are entered, press the previous key (30) once to
return to the
CONFIGURE DEVICES menu.
Assign Video Inputs,
continued
HOW TO NAVIGATE
IN THE MENU MODE
1 Press the menu key (29) to enter and
exit the menu mode from the
operational mode.
2 Press the direction keys (33) to scroll
from line to line, and to scroll through
options within a line.
3 Press the enter key (32) to select and
set an option.
4 Use the directional keys to scroll to
the next line.
5 Press the prev key (30) to return to the
previous screen.
6 Press the pre key (1) to exit the menu
mode and place the S–1000 in the
stand-by mode.
Prev