Krell Industries S-1000 User Manual

Page 38

Krell S–1000

After the selections for analog audio inputs are entered, press the
previous key. The

ASSIGN AUDIO INPUTS

screen appears. Select

DIGITAL.

The ASSIGN DIGITAL AUDIO INPUT

screen appears.

Use the direction and enter keys to scroll through and select the dig-
ital device you want to configure, select the digital input, and choose
the default mode for the four major surround sound digital formats:

DOLBY DIGITAL 2.0, DOLBY DIGITAL 5.1, DTS 5.1,

and

PCM.

You can choose a

decoding preference for each of these signals under

YOUR DECODE

PREFERENCE IS.

For more information, see Decoding Modes for the

S–1000,

on page 60.

The digital input must be set to

DISABLED

to use the analog input.and it must

be set to

DISABLED

to use preamp mode.

holds the last selected digital input.

The

DOLBY DIGITAL EX, DTS-ES DISCRETE 6.1,

and

DTS-EX MATRIX 6.1

operating

modes are available only when your system has 6 or 7 channels.

When the device is configured, press the previous key (30) to return
to the

ASSIGN AUDIO INPUTS

menu.

System Configuration,

continued

Step 2, Configure Devices

Assign Digital Audio
Inputs

Notes

Assign Digital Audio

Input Screen

Assign Analog Audio Inputs,

continued

AUTO-MIGRATION ON

allows the S–1000 to switch to the analog input

automatically, if no digital input is present. This function is particular-
ly useful for SACD players.

The analog signal must be assigned, not

DISABLED

, in order for auto-

migration to be active.