Kenwood KRF-V6200D - Manual (Page 5)

English
5
Names and functions of parts
1
(power) key
Standby indicator
Switch the unit ON and standby.
When the unit is in standby mode, the
standby indicator is lit.
2
Surround LED indicators
DOLBY DIGITAL indicator
Light when this unit is in the Dolby
Digital mode.
DTS indicator
Light when in the DTS mode.
ACTIVE EQ indicator
Light when in the ACTIVE EQ mode.
SPEAKERS B indicator
Light when the speakers connected to
SPEAKER B jacks are in use.
3
Remote sensor
4
VOLUME CONTROL knob
5
PHONES jack
Use for headphone listening.
6
SPEAKERS A/B/OFF key
Use to select the front speaker, or
select not to use the front speaker.
7
LISTEN MODE key º
Use to select the listen mode.
8
SETUP key (
Use to select the speakers' settings
etc.
9
MULTI CONTROL knob
Use to control a variety of settings.
4/¢ knob
Use to skip the file of the USB source
backwards/forwards.
¢
Use to select the radio station. ¤
0
BAND key
Use to select the broadcast band.
6 key
Use to play/pause the USB source.
¢
!
AUTO/MONO key
Use to select the auto tuning or
manual tuning mode.
¤
Use to select a recording mode. fl
7 key
Use to stop playing the USB source.
@
ACTIVE EQ key §
Use to select ACTIVE EQ setting.
#
INPUT MODE key
™
Use to switch between full auto,
digital and analog inputs.
Main unit
VOLUME CONTROL
USB/AV AUX
VIDEO L-AUDIO-R
SPEAKERS A/B/OFF
PHONES
LISTEN MODE SETUP BAND AUTO/MONO ACTIVE EQ INPUT MODE
MULTI CONTROL INPUT SELECTOR
PURE AUDIO MODE
DOLBY DIGITAL DTS ACTIVE EQ SPEAKRS B PURE AUDIO MODE
USB
D
$
INPUT SELECTOR knob
Use to select the input sources.
%
PURE AUDIO MODE key
£
PURE AUDIO MODE indicator
Use to select PURE AUDIO MODE.
When this mode is on, the PURE
AUDIO MODE indicator is lit.
^
USB/AV AUX key
Use to select USB or AV AUX source.
&
AV AUX jack
Use to connect a device such as a
camcorder and a game player.
*
USB jack
Use to connect a USB device such as
a flash memory and a digital audio
player.
Standby mode
While the standby indicator is lit, a small
amount of power is supplied to the system
to back up the memory. This is called
standby mode. Under the condition, the
system can be turned ON by the remote
control unit.
Display
Band indicators
Frequency display,
Input display,
Preset channel display,
Surround mode display
Speaker indicator
PRO LOGIC
indicator
AUTO DETECT indicator
DOLBY DIGITAL /
DOLBY DIGITAL EX
indicator
DTS / DTS-ES
indicator CLIP indicator
ST. indicator
MUTE
indicator
TONE indicator
DSP MODE
indicator
DIGITAL indicator
6CH INPUT indicator
RDS indicator
PTY indicator AUTO indicator
TUNED indicator
Input channel status indicator
Neo:6 indicator
DISCRETE 6.1
indicator
MATRIX 6.1
indicator