Kenwood KRF-V6200D - Manual (Page 44)

44
English
Specifications
AUDIO section
Rated output power during STEREO operation
KRF-V7200D : (63 Hz – 20 kHz, 0.7% T.H.D., at 6 Ω)
...........................................................................100 W + 100 W
KRF-V6200D : (63 Hz – 12.5 kHz, 0.7% T.H.D., at 6 Ω)
...........................................................................100 W + 100 W
Effective output power during STEREO operation
RMS (1 kHz, 10% T.H.D., at 6 Ω) ......................... 120 W + 120 W
Effective power output during SURROUND operation
FRONT
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) .. 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ... 120 W + 120 W
CENTER
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) .............. 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ............... 120 W
SURROUND
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
SURROUND BACK (KRF-V7200D only)
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) .. 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ... 120 W + 120 W
Total harmonic distortion
KRF-V7200D .....................................0.02 % (1 kHz, 50 W, 6 Ω)
KRF-V6200D .....................................0.05 % (1 kHz, 50 W, 6 Ω)
Frequency response (IHF’66)
KRF-V7200D : CD/DVD ............20 Hz – 80 kHz, +0 dB – –3.0 dB
KRF-V6200D : CD/DVD ............20 Hz – 70 kHz, +0 dB – –3.0 dB
Signal to noise ratio (IHF’66)
CD/DVD
..............................................................................100 dB
Input sensitivity / impedance
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 40 kΩ
AV AUX ................................................................ 550 mV / 50 kΩ
DVD/6CH INPUT ................................................. 550 mV / 27 kΩ
Output level / impedance
REC OUT (MD/TAPE, VIDEO 1) ........................... 550 mV / 470 Ω
PRE OUT (SURROUND BACK) (KRF-V6200D only)
................................................................................. 0.9 V / 2.2 kΩ
PRE OUT (SUBWOOFER) ........................................ 1.5 V / 1.5 kΩ
Tone control
BASS ............................................................... ±10 dB (at 100 Hz)
TREBLE ........................................................... ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency ...............32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / wave length
Optical ......................... –15 dBm – –21 dBm / 660 nm ±30 nm
Input level / impedance
Coaxial ...............................................................0.5 Vp-p / 75 Ω
VIDEO section
VIDEO inputs / impedance
Composite ............................................................1 Vp-p / 75 Ω
VIDEO outputs / impedance
Composite ............................................................1 Vp-p / 75 Ω
S-VIDEO inputs / impedance
Y-singal .................................................................1 Vp-p / 75 Ω
C-singal ......................................................... 0.286 Vp-p / 75 Ω
S-VIDEO outputs / impedance
Y-singal .................................................................1 Vp-p / 75 Ω
C-singal ......................................................... 0.286 Vp-p / 75 Ω
COMPONENT VIDEO inputs/ impedance
Y-signal .................................................................1 Vp-p / 75 Ω
CB/ CR-signal .....................................................0.7 Vp-p / 75 Ω
COMPONENT VIDEO outputs/ impedance
Y-signal .................................................................1 Vp-p / 75 Ω
CB/ CR-signal .....................................................0.7 Vp-p / 75 Ω
FM tuner section
Tuning frequency range .......................... 87.5 MHz – 108.0 MHz
Usable sensitivity (DIN at 75 Ω)
MONO .................. 1.3 μV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO ................. 45 μV / 42.1 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO .................................................... 0.2% (71.2 dBf input)
STEREO .................................................. 0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO ............................ 65 dB (40 kHz DEV., 71.2 dBf input)
STEREO ........................... 60 dB (46 kHz DEV., 71.2 dBf input)
Stereo separation (DIN 1 kHz) ............................................36 dB
Selectivity (DIN ±300 kHz) .................................................64 dB
Frequency response (30 Hz – 15 kHz) .............. +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range ............................. 531 kHz – 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB) .... 16 μV / (600 μV/m)
Signal to noise ratio (30% mod.) .... 50 dB (60 dBμV EMF input)
USB section
Usable USB device ................................ USB Mass Storage Class
Interface ...................................USB 1.1 (Full speed) compatible
Maxmum current drain ................................................... 500 mA
General
Power consumption
KRF-V7200D .................................................................... 240 W
KRF-V6200D .................................................................... 250 W
Standby power consumption ............................. less than 0.6 W
AC Outlet SWITCHED
Australia ..................................................... 1 (total 90W max.)
Other countries .......................................... 2 (total 90W max.)
Dimensions ...............................................W: 440 mm (17-5/16")
....................................................................H: 159 mm (6-1/4")
............................................................... D: 345 mm (13-9/16")
Weight (net)
KRF-V7200D ..................................................... 9.6 kg (21.2 lb)
KRF-V6200D ..................................................... 8.3 kg (18.3 lb)
Notes:
1. Kenwood follows a policy of continuous advancements in
development. For this reason specifications may be changed
without notice.
2. The full performance may not be exhibited in an extremely cold
location (under a water-freezing temperature).
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever
you call upon your dealer for information or service on this
product.
Model
Serial Number