Kodak 3000 - Manual (Page 22)

Using Easy Config
3-6 May 2000
CMYK ICC Input Profile - Select a CMYK ICC input profile if you created
or obtained one for your image source. Otherwise, the default should be
used.
Note: The RGB and CMYK ICC Input Profile options are available when
the input device supports RGB or CMYK input.
Use Embedded ICC Input Profile - Select this check box if you wish to
use the ICC profiles that are embedded in the image.
Setting the Defaults on the Printer Tab
The Printer tab allows you to change the defaults for a variety of output
devices. The options that appear in the configuration box are specific to
the output device you select. The following options are specific to a 3000
Series Printer:
Printer - Select your output device from the list.
Print to File - Select this check box to process images to print at a later
time.
Media - Select the media loaded in the 3000 Series Printer and the width
of the media.
Ink Type - Select the type of ink that is installed in the 3000 Series Printer,
either dye or pigment.