Kenwood LZ-702W User Manual
Page 9
English
|
9
Initializing the User Settings
The setting value is set to the initial state of
factory.
1
Touch the [Clear] button of "Memory".
2
Touch the [Yes] button.
Touch the [Yes] button, restores the factory set
default values for individual items from those set
by the user.
"System Settings were Initialized" is displayed.
Initialization is cancelled.
Touch the [No] button.
Setting the AV Output
Selects an AV source to be output at the "AV
OUTPUT" terminals.
"AV-OUT"
Touch
Setting
[
7AV-IN1]
Select the AV IN1 source.
[
7AV-IN2]
Select the AV IN2 source.
[
7Off]
No output to the "AV OUTPUT" terminals.
Setting the Speaker Mode
You can select the built-in speaker mode you
wish.
Touch the [
2 ] or [ 3 ] button of "SP".
Display
Setting
"Normal"
Sound with monitor picture.
"NAV"
Sound of navigation.
"Video1"
Sound of video 1.
"Video2"/ "R-Cam" Sound of video 2.
"Off"
Built-in speaker is turned off.
Switching the Screen
"SYSTEM2"
Touch
Setting
[
2]
Displays the System Setup-1.
[
3]
Displays the System Setup-3.
[Return]
Return to the setup menu.
Switching the Screen
"SYSTEM3"
Touch
Setting
[
2]
Displays the System Setup-2.
[Return]
Return to the setup menu.
= [MENU] = [System Setup] = [3]
«
= [MENU] = [System Setup] = [3] = [3]
«
«
«