Kenwood LZ-702W - Manual (Page 5)

English | 5
Switching Screen Mode
Press the [MODE] button.
Each time the button is pressed, the screen
mode switches as follows:
Display Setting
"Full" Full picture mode
"Just" Justify picture mode
"Cinema" Cinema picture mode
"Zoom" Zoom picture mode
"Normal" Normal picture mode
• You cannot operate when the navigation picture is
displayed.
Setting the Speaker Mode
You can select the built-in speaker mode you
wish.
Press the [MODE] button for at least 1 second.
Each time the button is pressed for at least 1
second, the built-in speaker mode switches as
follows:
Display Setting
"Normal" Sound with monitor picture.
"NAV" Sound of navigation.
"Video1" Sound of video 1.
"Video2"/
"R-Cam" Sound of video 2.
"Off" Built-in speaker is turned off.
Setting the AV Output
Selects an AV source to be output at the "AV
OUTPUT" terminals.
Press the [MENU] button for at least 1 second.
Each time the button is pressed for at least 1
second, the AV output switches as follows:
Display Setting
"Video1"/
"NAV" Select the AV IN1 source.
"Video2"/
"R-Cam" Select the AV IN2 source.
"Off" No output to the "AV OUTPUT" terminals.
Display information
When you press the [V.SEL] button, the status of
the monitor is displayed.
1
4
2
3
5
1 Screen mode Display
2 Volume Display
3 Speaker mode Display
4 Video source Display
5 AV output Display
• When (page 8) is
set to "Mirror" and the display is showing rear view
camera pictures, display information is not displayed.
• The information display is cleared automatically after
approximately 5 seconds.