Kenwood LZ-702W - Manual (Page 10)

10 | English
Adjusting the Touch Position
The touch panel can be adjusted if the position
touched and the operation performed do not
match.
1 Accurately touch the mark at the lower left.
2 Accurately touch the mark at the upper right.
When the mark at the upper right is touched, the
adjustment is completed and the system setup
menu screen reappears.
• If the [Cancel] button is touched without touching the
button at the lower left, the adjustment is canceled
and the screen goes back to the Setup Menu Screen.
• If the [Cancel] button is touched after touching the
button at the lower left, the button at the lower left
reappears.
• If the [Reset] button is touched, the settings are reset
to the factory defaults and the setup menu screen
reappears.
= [MENU] = [Touch Adjust]
«
«
Setup Menu