Kenwood KRF-V7773D - Manual (Page 11)

10
Using R
eceiv
er
How Do I Adjust the Sound?
Adjusting the Volume
Use one of the following methods to adjust the volume.
• Turn the VOLUME knob on the front panel of the receiver.
L SPEAKERS R I NPUT
MODE CD 2/TAPE 2 MONITOR LISTEN
MODE SET UP SOUND MULTI CONTROL fi % P.CALL MEMORY AUTO BAND fi %
• Press +
VOL.
or - VOL. on Remote Control unit.
2WAY LCD REMOTE CONTROL UNIT
+
-
+
-
11
Using R
eceiv
er
How Do I Adjust the Sound?
Adjusting the Tone (Stereo mode only)
The Tone control adjusts the bass and treble tone of your front speakers
manually. In addition to setting Bass and Treble tone adjustment values,
you can completely bypass the tone control circuitry for a purer sound.
1. Press the SOUND key on Remote Control unit repeatedly until Tone
= Off or On is displayed.
On or Off refers to the current setting status.
2. Press the LCD cursor up/down ( / ) key on Remote Control unit
to select Tone = On (or Off if desired so).
3. When On is selected above and the SOUND key or Next key is pressed
again, the Bass setting menu appears.
When Off is selected above, the Loudness setting menu appears.
4. Press the LCD cursor up/down ( / ) key on Remote Control unit
to select the desired tone level.
Adjust in the range from +10 to -10.
Sound
Tone = Off
Home Next
Sound
Bass = +10
Home Next