Tuner features, 32 1 tuning – Kenwood Z920DVD User Manual

Page 31

— 31 —

Press the SRC button repeatedly until the tuner mode is
obtained. "TUNER" is displayed only when the tuner mode is
selected.

Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
Press the AM button to select the MW and LW bands.

• Auto Seek Tuning

Press the

¢ button to seek increasing frequencies.

Press the

4 button to seek decreasing frequencies.

• Preset station seek tuning

Press the

¢ button to move to the next preset station (i.e.,

the one with the next highest number), and the

4 button to

move to the last preset station (i.e., the one with the next
lowest number).

If the frequencies stored at the preset numbers receive
stations which were not originally memorized when travelling
long distances, the preset number is not displayed. In such
cases, pressing the

4/¢ button to use preset station

seek will receive channel 1.

• Manual Tuning

Press the

¢ button to increase the frequency by one step.

Press the

4 button to decrease the frequency by one step.

• The ST indicator lights up when stereo broadcasts are being

received.

• Please see the menu settings about selecting tuning mode.

(page 58)

NOTE

Tuning

Tuner features

XOVER

AUD

DISP

NAME.S

MENU

3-D

DAB

PWR

OFF

DSP

SRC

#1-6

ST indicator

Preset station number

Band display

Frequency

Description about this indicator for these features can be displayed
by setting the Lower Part Display (page 14) to
"... + Function indicator."