Kenwood Z920DVD - Manual (Page 29)

— 29 —
Display and Setting:
"Bi Phantom ON" / "Bi Phantom OFF"
• You cannot operate when “Dolby PL“ is set to “OFF”.
• Not available during the Dual zone system is on.
• You cannot operate when Dolby Digital 5.1ch surround or DTS
5.1ch surround DVD and DTS-CD are being played.
NOTE
6.Selecting the Acoustic Image
Display and Setting:
" PCM center ON" / " PCM center OFF"
• This select can be set, when the "Dolby PL" is turned OFF by
the 2ch PCM signal
• Not available during the Dual zone system is on.
NOTE
7.Turning the Centre Output On/Off
Select the sound output speaker for Multi channel sound.
Display and Setting:
"Multi CH 3/2" / "Multi CH 2/2" / "Multi CH 3/0" / "Multi CH 2/0"
"Multi CH 3/2" : Centre, Front and Rear speaker
"Multi CH 2/2" : Front and Rear speaker
"Multi CH 3/0" : Centre and Front speaker
"Multi CH 2/0" : Front speaker only
• Not available during the Dual zone system is on.
• You cannot operate when “Dolby PL” is set “OFF” by 2ch PCM
DVD, VCD or CD play, and other than in DVD mode.
• The setting may be invalid according to the disc signal format.
NOTE
8.Selecting the Multi Channel
Display and Setting:
"Sub Woofer ON" / "Sub Woofer OFF"
Not available during the Dual zone system is on.
NOTE
9.Turning the Sub Woofer Output On/Off