Audio effect control features, English – Kenwood Z920DVD User Manual
Page 28
— 28 —
English
Each time you press the FM or AM button, the adjustment mode
will be switched as follows:
"BAND-
1 f
" / "BAND-
1 Gain
" / "BAND-
1 Q
" / "BAND-
2 f
" / "BAND-
2
Gain
" / "BAND-
2 Q
" / "BAND-
3 f
" / "BAND-
3 Gain
" / "BAND-
3 Q
" /
"BAND-
4 f
" / "BAND-
4 Gain
" / "BAND-
4 Q
"
Adjusting the Centre Frequency:
Display and Setting:
"BAND-
1 f
" : 60Hz/ 80Hz/ 100Hz/ 120Hz/ 160Hz/ 200Hz/ 250Hz
"BAND-
2 f
" : 315Hz/ 400Hz/ 500Hz/ 630Hz/ 800Hz/ 1kHz
"BAND-
3 f
" : 1.25kHz/ 1.6kHz/ 2kHz/ 2.5kHz/ 3.15kHz/ 4kHz
"BAND-
4 f
" : 5kHz/ 6.3kHz/ 8kHz/ 10kHz/ 12.5kHz/ 16kHz
Adjusting the Gain:
Display and Setting:
"BAND-
1 Gain
" : -12 – 0 – +12
"BAND-
2 Gain
" : -12 –- 0 – +12
"BAND-
3 Gain
" : -12 – 0 – +12
"BAND-
4 Gain
" : -12 – 0 – +12
Adjusting the Quality Factor:
Display and Setting:
"BAND-
1 Q
" : 0.25 / 0.50 / 1.00 / 2.00
"BAND-
2 Q
" : 0.25 / 0.50 / 1.00 / 2.00
"BAND-
3 Q
" : 0.25 / 0.50 / 1.00 / 2.00
"BAND-
4 Q
" : 0.25 / 0.50 / 1.00 / 2.00
• Not available during the Dual zone system is on.
• There is no equalizer effect in the centre speaker and Sub
Woofer output.
NOTE
2.Parametric Equalizer
Display and Setting:
"POSITION ALL" / "POSITION F-LEFT" / "POSITION F-RIGHT" /
"POSITION F-ALL" / "POSITION R-ALL"
"POSITION ALL" : Centre of the passenger cabin
"POSITION F-LEFT" : Centred on the front left seat
"POSITION F-RIGHT" : Centred on the front right seat
"POSITION F-ALL" : Centred on the front seat
"POSITION R-ALL" : Centred on the rear seat
Not available during the Dual zone system is on.
NOTE
4.Selecting the Position Mode
Press the #1 - #3 button for at least two seconds.
Recalling your settings of the parametric equalizer
Press the #1 - #3 button for the desired the parametric equalizer
setting.
Not available during the Dual zone system is on.
NOTE
3.Storing Your Setting of the parametric equalizer
Audio effect control features
Dolby Pro Logic is a technology developed by Dolby
Laboratories for the active decoding of Dolby Surround
encoded source.
Display and Setting:
"Dolby PL ON" / "Dolby PL OFF"
• Not available during the Dual zone system is on.
• You cannot operate Dolby Digital 5.1ch surround or DTS 5.1ch
surround DVD and DTS-CD are playing.
NOTE
5.Using the DOLBY PRO LOGIC