Kenwood Z920DVD - Manual (Page 23)

— 23 —
Audio effect control features
Setting value Selecting mode
The following operation allows separate sound sources to
control the output of the front and rear speakers.
Setting the Dual Zone function:
Press the S.A button for at least one second to enter the Dual
Zone System setup mode.
Each time you press the
38 button, the mode switches as
follows:
"ON" : The dual zone system function is on.
"OFF" : The dual zone system function is off.
Setting the Dual Zone Speaker:
You can select whether to output KDS-P901(AUX) sound from
the rear or from the front.
Each time you press the FM or AM button, the mode switches
as follows:
"Normal" : KDS-P901(AUX) sound send to the rear speaker.
"Reverse" : KDS-P901AUX) sound send to the front speaker.
This mode is available during the Dual zone system is on.
NOTE
Dual Zone System